CNCS has state-of-the art equipment to handle all your Thermal Imaging needs both Residential and Commercial using a top of the line Thermal Imaging camera from Flir along with a top of the line blower door with computerized software. All CNCS thermographers were certified at the Flir training facility in Boston which is the leader in thermal imaging technology.

Thermal Image of a house showing the heat loss at the door and basement. Most people when considering improving the weatherization of there home immediately start replacing windows as you can see by the infrared image the greatest heat loss is in the basement. With inside inspection found that the heating system duct work ran thru a crawl space that was not insulated, with the cement block being only an R1 rating this had to be address  

Thermal Image of Radiant floor inspection after installation looking for leaks and problem coils. This process is also used to pin point plumbing leaks in concrete floors / slab foundations, minimizing the area needed to be torn up to repair leak.

 =

Thermal Image of a ball screw X-axis Hardinge VMC 1000. This inspection is done to to check for problem areas, overheated bearing, lube problem and guide way friction problems.

Call or e-mail now to set up your home inspection

  Phone:  (330) 606-0804   

  e-mail:   cncsllc@aol.com