|
|
|
|
With service centers in Ohio and Michigan |
We rebuild all turrets but specialize in Hardinge
Turret Rebuilding
Do you think you might have a turret problem !
Why go with CNCS and not your OEM? Let me give you a couple of reasons. One of course is cost, then there's turnaround time, longer warranty period and a list of satisfied customers.
We offer removal and installation with transportation to the shop with a three-day turnaround on most turrets dependent upon availability of parts. If a planned rebuild is possible, we would remove the turret on Friday and reinstall it on Monday baring any unforeseen major problems being uncovered.
CNCS offers a cost effective turret rebuild plan at about half the cost of an OEM and, in most cases, a longer warranty period.
Prices are for rebuild only removal or installation are at normal service rates and is not part of the rebuild warranty.
Most OEMs give you a 3 month warranty; CNCS is 6 months
CNCS Now offers Hardinge T42 Turret Exchange Program: Contact us now for details
Pictured above is a Conquest 42 turret sent in with indexing problems, e.g. would only index in one direction. The set screw came loose on the gear and the belt dragged it into the cover when indexing in CCW direction. Tested gearbox and it was still in good condition so replaced the pulley and reused gear box. Also found broken alignment pins so customer opted for complete rebuild. Turret was removed on Friday and machine was back on line before noon on Monday.
Pictured above is a T42 turret piston assembly. Note the rust and deterioration of the bearings, this assembly took 19 tons of pressure to separate it from the housing. Normally the piston can be removed with just air pressure and the bearings come off with minimal force. Letting your turret go this long could double your rebuild costs in parts. The lower right picture is of the coupling inside your turret which aligns the turret during unclamp and clamp.
Rebuilds Contact
(330) 606-4243
|
|